POD VINCI 3 BY VOOPOO : THE VINCI POD REINVENTED
With this pod Vinci 3 Voopoo puts forward a great versatility to satisfy all types of vapers. Despite its gain in weight, the Vinci 3 pod remains a compact e-cigarette that can accompany you everywhere without worry. The pod of Voopoo is made with a zinc alloy and is decorated with front and rear shiny finishes carbon fiber or gradient colors depending on the color chosen.
Another element likely to attract your attention on this pod Vinci 3, the wheel allowing to adjust the airflow. This airflow system called Mobius by Voopoo, offers a wide variety of airflows and a very precise adjustment. The adjustment of the airflow can be done on both sides of the pod. It is therefore always at hand to calibrate your vaping, whether it is MTL, RDL or DL.
The Vinci 3 pod is equipped with a window for a good visibility of your level of e-liquid and thus avoid dry hits surprises. In addition to this window, you will find the fire button that will serve to vape although the option auto draw is also available. The fire button will also serve you to make your settings via a screen of 0.69", but more info on this subject a little lower ;).
Pod Vinci 3: An e-cigarette for all
With a power that can go from 5 to 50 watts, an airflow of the future and compatibility with all the excellent PnP coils Voopoo (0.15 ohm to 1.2 ohm), you will understand, this pod will suit many vapers. These assets allow it to perform in MTL, RDL and DL. Voopoo gives you all the cards in hand with this pod, you now optimize it to find the vaping that will be perfect for you.
To support your needs, Voopoo has stuck a built-in battery of 1800 mAh in the belly of this pod. This battery is easily charged via a USB-C port. Its generous battery life will provide up to two days of vape in MTL use and a good day in RDL use. The spitters of big clouds DL the most voracious will perhaps be brought to make a stop at the charging booth during the day.
How to use your Pod Vinci 3?
All your settings for the Gene Ai chipset found in the Vinci 3 are done with the fire button and with the help of a display on the pod's screen. Let's start with the ignition, we stay on a classic five presses on the fire button. To change the power, it will be 3 presses, then you can increase the watts by pressing the fire button. The chipset recognizes the coil installed to avoid that you exceed the maximum recommended power, once you are on the desired power, do not touch anything else, and wait for the validation of your setting (the power will stop flashing).
Once turned on, five presses of the fire button will open a menu with the following options:
Button Lock: Lock the fire button while preserving the ability to vape in auto draw. Very practical to avoid accidental lighting a little too close to your private parts in your pocket.
Puff Clear: To reset your puff counter to zero.
Power Off : To power off.
Now you are ready to control your Vinci 3 with your eyes closed, let's move on to its cartridge!
The Vinci 3 cartridge from Voopoo
With your Vinci 3 pod you will receive the Vinci 3 cartridge specially designed for it. The Vinci 3 cartridge is equipped with a PCTG tank of 4 ml. Its drip tip is removable so you can fill the cartridge from the top by inserting your liquid directly into the silicone membrane. No need to remove the cartridge from the pod to fill it and that's cool. The Vinci and Vinci series V2 cartridges are not compatible with the Vinci 3 pod.
The Vinci 3 cartridge is compatible with all pnP coils from 0,15 ohm to 1,2 ohm. So you'll have plenty to experiment with. This includes pnp TW coils with improved lifetime and the PnP DW with reworked juice absorption. In this kit, you'll find a 0.30 ohm TW30 PnP coil and a 0.60 ohm DW60 PnP coil to get you started with your new pod.
- TW30 0.30 ohm mesh: Restrictive airflow - to use between 28 and 36 watts - ratio 50PG/50VG to 30PG/70VG - not suitable for nicotine salts, CBD and high nicotine levels (6 mg/ml maximum recommended).
- DW 0.60 ohm mesh: MTL draw not too tight - to use between 18 and 23 watts - ratio 60PG/40VG to 40PG/60VG - not suitable for CBD eliquids, nicotine salts above 10 mg/mland high nicotine levels (9 mg/ml maximum recommended).
Dimensions of the pod Vinci 3 by Voopoo:
101.3 × 30.5 × 21.6 mm
The kit Vinci 3 pod Voopoo contains:
- 1 Vinci 3 pod
- 1 Vinci 3 cartridge
- 1 PnP coil TW30 0.30 ohm
- 1 PnP coil DW60 0.60 ohm
- 1 USB-C cable
- 1 user manual
